Delving into the science of capillary effect for laser polishing

Abstract

Laser polishing techniques offer promising solutions for enhancing surface quality in precision surface finishing. By harnessing laser beams, this method provides efficient and controllable surface treatment, which is crucial for achieving desired surface smoothness and optical performance. Central to this process is the capillary effect driven by surface tension, which facilitates fluid flow on solid surfaces. Despite advancements, challenges persist in predicting and controlling capillary flow due to its complex nature. This paper explores the role of the capillary effect in laser polishing, outlining fundamental principles, discussing influencing factors, and proposing strategies for optimizing polishing outcomes. Understanding and manipulating the capillary effect holds the key to unlocking the full potential of laser polishing, offering avenues for improving surface finishes and material properties across various applications.

Document Type: Perspective

Cited as: Huang, W., Yang, S., Xu, J., Xiao, J. Delving into the science of capillary effect for laser polishing. Capillarity, 2024, 13(2): 47-52. https://doi.org/10.46690/capi.2024.11.03

References

Anthony, T. R., Cline, H. E. Surface rippling induced by surface-tension gradients during laser surface melting and alloying. Journal of Applied Physics, 1977, 48(9): 3888-3894.

Cai, J. Some key issues and thoughts on spontaneous imbibition in porous media. Chinese Journal of Computational Physics, 2021, 38(5): 505-512. (in Chinese)

Cai, J., Jin, T., Kou, J., et al. Lucas-washburn equation-based modeling of capillary-driven flow in porous systems. Langmuir, 2021, 37(5): 1623-1636.

Cui M., Lu L., Zhang Z., et al. A laser scanner-stage synchronized system supporting the large-area precision polishing of additive-manufactured metallic surfaces. Engineering, 2021, 7: 1732-1740.

Chang, C. S., Chen, T. H., Li, T. C., et al. Influence of laser beam fluence on surface quality, microstructure, mechanical properties, and tribological results for laser polishing of SKD61 tool steel. Journal of Materials Processing Technology, 2016, 229: 22-35.

Chen, H., Wei, C., Cao, Z., et al. Femtosecond laser-selective polishing of RB-SiC at a fluence between its two-phase threshold. Optical Materials Express, 2022, 12(4): 1491.

Dorrah, A. H., Capasso, F. Tunable structured light with flat optics. Science, 2022, 376(6591): eabi6860.

Hong, J., Huang, H., Zhang, L., et al. Laser polishing and simultaneous hardening of the electrical discharge machined Zr-based metallic glass surface. Materials & Design, 2024, 237: 112599.

Huang, W., Li, T., Long, G., et al. Surface topography and subsurface structure evolution in laser micro polishing of monocrystalline silicon. Optics & Laser Technology, 2024, 177: 111068.

Huang, W., Zhou, X. Freezing of axisymmetric liquid bridges. Physical Review Fluids, 2020, 5(10): 103601.

Huang, W., Zhou, X., Xu, J., et al. Effect of liquid size on vertical liquid bridge freezing. International Journal of Thermal Sciences, 2022, 173: 107386.

Kou, S., Limmaneevichitr, C., Wei, P. S. Oscillatory marangoni flow: A fundamental study by conduction mode laser spot welding. Welding Journal, 2011, 90: 229-241.

Lee, Y. S., Farson, D. F. Surface tension-powered build dimension control in laser additive manufacturing process. The International Journal of Advanced Manufacturing Technology, 2015, 85(5-8): 1035-1044.

Li, C., Liu, D., Liu, G., et al. Surface characteristics enhancement and morphology evolution of selective-laser-melting (SLM) fabricated stainless steel 316L by laser polishing. Optics & Laser Technology, 2023, 162: 109246.

Li, Y., Arthanari, S., Guan, Y. Influence of laser surface melting on the properties of MB26 and AZ80 magnesium alloys. Surface and Coatings Technology, 2019, 378: 124964.

Li Y., Zhang Z., Guan Y. Thermodynamics analysis and rapid solidification of laser polished Inconel 718 by selective laser melting. Applied Surface Science, 2020, 511: 145423.

Liu, Y., Lin, Y. S. Multiplexed terahertz multifocal metalens based on stretchable single-, dual-, and quad-axis synthetic rectangular optical sparse aperture. Materials & Design, 2024, 237: 112631.

Mushtaq, R. T., Wang, Y., Khan, A. M., et al. A post processing laser polishing method to improve process performance of 3D printed new Industrial Nylon-6 polymer. Journal of Manufacturing Processes, 2023, 101: 546-560.

Niitsu, K., Tayama, Y., Kato, T., et al. Laser recovery of grinding-induced subsurface damage in the edge and notch of a single-crystal silicon wafer. Surface Topography: Metrology and Properties, 2019, 7(1): 015013.

Pan, M., Fu, Y., Zheng, M., et al. Dielectric metalens for miniaturized imaging systems: Progress and challenges. Light: Science & Applications, 2022, 11(1): 195.

Peng, X., Cheng, X., Han, Y., et al. Laser based defect characterization and removal process for manufacturing fused silica optic with high ultraviolet laser damage threshold. Light: Advanced Manufacturing, 2023, 4(21): 1-14.

Pfefferkorn, F. E., Duffie, N. A., Li, X., et al. Improving surface finish in pulsed laser micro polishing using thermocapillary flow. CIRP Annals, 2013, 62(1): 203-206.

Sato, H., Nishio, S. Polymer lasser photochemictry, ablation, reconstruction, and polymerization. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 2001, 2: 139-152.

Shao, T. M., Hua, M., Tam, H. Y., et al. An approachto modelling of laser polishing of metals. Surface and Coatings Technology, 2005, 197: 77-84.

Shen, H., Pan, Y., Zhou, J., et al. Forming mechanism of bump shape in pulsed laser melting of stainless steel. Journal of Heat Transfer, 2017, 139(6): 062301.

Tan C., Zhao L., Chen M., et al. Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation. Optics & Laser Technology, 2022, 147: 107648.

Temmler, A., Braun, K., Uluz, E. Heat accumulation and surface roughness evolution in CO2 nanosecond laser ablation of quartz glass. Optics & Laser Technology, 2021, 144: 107426.

Temmler, A., Liu, D., Luo, J., et al. Influence of pulse duration and pulse frequency on micro-roughness for laser micro polishing (LµP) of stainless steel AISI 410. Applied Surface Science, 2020, 510: 145272.

Vadali, M., Ma, C., Duffie, N. A., et al. Pulsed laser micro polishing: Surface prediction model. Journal of Manufacturing Processes, 2012, 14(3): 307-315.

Wang, L., Wang, N. Effect of substrate orientation on the formation of equiaxed stray grains in laser surface remelted single crystal superalloys: Experimental investigation. Acta Materialia, 2016, 104: 250-258.

Xiao, J., Huang, W., Li, T., et al. Laser assisted surface conditioning of a residual pattern on single crystal silicon induced by ultra-precision cutting. Optical Materials Express, 2022, 12(4): 1303.

Xu, J., Zou, P., Wang, W., et al. Study on the mechanism of surface topography evolution in melting and transition regimes of laser polishing. Optics & Laser Technology, 2021a, 139: 106947.

Xu, J., Zou, P., Wang, X., et al. Investigation into the laser polishing of an austenitic stainless steel. Optics & Laser Technology, 2023, 163: 109378.

Xu, Z., Ouyang, W., Liu, Y., et al. Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components. Journal of Manufacturing Processes, 2021b, 65: 51-59.

Yu T., Tian Y., Chen M. A novel method to additively repair micro-damaged fused silica using localized CO2 laser. Materials Letters, 2023, 349: 134901.

Zhang, X., Chen, L. Effects of laser scanning speed on surface roughness and mechanical properties of aluminum/Polylactic Acid (Al/PLA) composites parts fabricated by fused deposition modeling. Polymer Testing, 2020, 91: 106785.

Zhang, X., Chen, X., Chen, T., et al. Influence of pulse energy and defocus amount on the mechanism and surface characteristics of femtosecond laser polishing of SiC ceramics. Micromachines, 2022, 13(7): 1118.

Zhang, X., Ji, L., Zhang, L., et al. Polishing of alumina ceramic to submicrometer surface roughness by picosecond laser. Surface and Coatings Technology, 2020, 397: 125962.

Zhao, L., Cheng, J., Chen, M., et al. Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing. International Journal of Extreme Manufacturing, 2019, 1(3): 035001.